Volume 3 Number 1 (Feb. 2012)
IJESD 2012 Vol.3(1): 15-19 ISSN: 2010-0264
DOI: 10.7763/IJESD.2012.V3.180

Optimization and Technical Transformation for Desalting Treatment Process of Detergent Factory

Shuangchun Yang, Yi Pan, Guian Zhang, and Guobin Liu

Abstract—Existing process for a detergent factory of de-mineralized water system was as the main research object. According to its water quality characteristics and the investigation for original desalting process, desalting process design was made. Then test experiment was proceeded at 1.2m3/h scale, and the system was divided into three subsystems: Pretreatment, Reverse osmosis desalting system and Electrodeionization treatment system. And stability of new craft was investigated at pilot scale, Results showed that in this craft, SID of ultra filtration effluent was less than 2, desalting ground water completely served as boiler water, and Electrodeionization meet the requirement for processes pure water after secondary treatment. But Electrodeionization effluent quality deteriorated occasionally, so Sodium hydroxide was added by metering

Index Terms—Desalting process, test experiment, pilot scale, electrodeionization.

Yi Pan, Shuangchun Yang, Guian Zhang and Guobin Liu are with the Liaoning Shihua University, Liaoning, China. (e-mail: panyi_bj@126.com).

[PDF]

Cite: Shuangchun Yang, Yi Pan, Guian Zhang, and Guobin Liu, "Optimization and Technical Transformation for Desalting Treatment Process of Detergent Factory," International Journal of Environmental Science and Development vol. 3, no. 1, pp.15-19 , 2012.





 General Information

  • ISSN: 2010-0264 (Print); 2972-3698 (Online)
  • Abbreviated Title: Int. J. Environ. Sci. Dev.
  • Frequency: Bimonthly
  • DOI: 10.18178/IJESD
  • Editor-in-Chief: Prof. Richard Haynes
  • Managing Editor: Ms. Cherry L. Chen
  • Indexing: Scopus (CiteScore 2022: 1.4), Google Scholar, CNKI, ProQuest, EBSCO, etc. 
  • E-mail: ijesd@ejournal.net

  Call for Papers

When submitting papers for potential publication in IJESD, please submit an original editable file in .doc style file. All figures, tables, and equations, etc., should be embedded into the original file.